BEGIN:VCALENDAR
VERSION:2.0
PRODID:-//CERN//INDICO//EN
BEGIN:VEVENT
SUMMARY:Magnetic vector charges in the mystery of a circular current’s p
 air of distinct Cartesian elemental magnetic dipoles
DTSTART;VALUE=DATE-TIME:20110715T064500Z
DTEND;VALUE=DATE-TIME:20110715T070000Z
DTSTAMP;VALUE=DATE-TIME:20261107T111340Z
UID:indico-contribution-296-4850@events.saip.org.za
DESCRIPTION:Speakers: Max Chirwa (Walter Sisulu University)\nA circular el
 ectric current\, perpendicularly bisected by a field plane\, was modelled 
 as a continuum of pairs of distinct Cartesian component elemental magnetic
  vector charges normal and parallel to the field plane. The Cartesian elem
 ental magnetic vector charges normal to the field plane pair up into Carte
 sian elemental magnetic dipoles with intra-dipolar displacements parallel 
 to the plane. These dipoles generate the overall magnetic vector potential
  at the field point. The Cartesian elemental magnetic vector charge compon
 ents parallel to the field plane form Cartesian elemental magnetic dipoles
  (with intra-dipolar displacements perpendicular to the field plane) which
  individually and collectively contribute nothing to the overall magnetic 
 vector potential. Each continuum of these two sets of Cartesian elemental 
 magnetic dipoles independently yields the traditionally renowned “magnet
 ic dipolar moment of a circular current”. However\, together their two d
 istinct magnetic fields\, as well as their two distinct magnetic torques\,
  constitute the circular current’s overall magnetic field and the total 
 magnetic torque respectively. These results reconcile only if the magnetic
  dipolar moments of both sets are endorsed\, that is a circular current of
  any spatial size is a continuum of pairs of distinct Cartesian elemental 
 magnetic dipoles and that consequently its overall magnetic dipolar moment
  is numerically twice the traditional value. In addition the customary ad 
 hoc definition of the magnetic dipole moment of a current loop is deceptiv
 ely erroneous\, thus prompting a review of many relations involving it. Th
 ese include the magnetic torque and magnetic field generated by it\, and t
 he classical magneto-mechanical ratio.\n\nhttps://events.saip.org.za/event
 /7/contributions/4850/
LOCATION: Acro1
URL:https://events.saip.org.za/event/7/contributions/4850/
END:VEVENT
BEGIN:VEVENT
SUMMARY:Ab-initio study of the energy of formation and diffusion paths of 
 self-interstitials in silicon
DTSTART;VALUE=DATE-TIME:20110714T120000Z
DTEND;VALUE=DATE-TIME:20110714T121500Z
DTSTAMP;VALUE=DATE-TIME:20261107T111340Z
UID:indico-contribution-296-4853@events.saip.org.za
DESCRIPTION:Speakers: Jacques Pienaar (University of Pretoria)\nThe format
 ion energy of self-interstitial defects in silicon was studied. The 〈110
 〉split site was found to be the lowest energy position for the silicon s
 elf-interstitial at neutral charge state\, as well as singly and doubly ne
 gative charged state. The tetrahedral site is found to be the lowest energ
 y site for the singly and doubly charged positive states. The energy barri
 ers for diffusion from the 〈110〉split site to the hexagonal and tetrah
 edral sites were found to be 0.370 and 0.361 eV respectively. Diffusion be
 tween the tetrahedral and hexagonal sites has an energy barrier of 0.074 e
 V. These energy barriers are found to be too great to account for athermal
  diffusion of the silicon self-interstitial\, and diffusion paths involvin
 g cyclic changes in charge state are most likely to be responsible for the
  athermal diffusion observed at low temperature.\n\nhttps://events.saip.or
 g.za/event/7/contributions/4853/
LOCATION: Acro1
URL:https://events.saip.org.za/event/7/contributions/4853/
END:VEVENT
BEGIN:VEVENT
SUMMARY:The impurity levels of lanthanide ions in silica
DTSTART;VALUE=DATE-TIME:20110714T093000Z
DTEND;VALUE=DATE-TIME:20110714T094500Z
DTSTAMP;VALUE=DATE-TIME:20261107T111340Z
UID:indico-contribution-296-4859@events.saip.org.za
DESCRIPTION:Speakers: R.E. Kroon (Physics Dept\, University of the Free St
 ate)\nSilica is a basic material of technological importance for optics\, 
 microelectronics\, photonics and fibre optics.  Its high absorption edge e
 nergy makes its particularly useful for UV applications and it has been us
 ed as a host material for a variety of luminescent lanthanide ions due to 
 its chemical stability and non-hygroscopic nature. For lanthanide ions the
  4f electron energy levels are shielded from the host environment by the f
 illed outer 5s and 5p orbitals\, so that the transitions between these sta
 tes and therefore the luminescent wavelengths are relatively insensitive t
 o the host.  For this reason little attention has been paid until recently
  to the location of the impurity levels of the lanthanide ions within the 
 energy gaps of their hosts.  However\, luminescence from some lanthanide i
 ons\, e.g. cerium\, occurs due to f-d transitions from the unshielded 5d s
 tate of which the energy relative to the f-states is therefore host depend
 ent.   The absolute positions of the 4f and 5d states relative to the ener
 gy gap of the host also affect quenching and charge trapping phenomena and
  so they are required for proper modeling of phosphor performance.  Recent
 ly Dorenbos has suggested that the energy levels of any of the 13 divalent
  lanthanides relative to the band edges of the host can be found using onl
 y three parameters. However\, obtaining this data for a particular host is
  not always straightforward e.g. use can be made of the f-d transition ene
 rgy of cerium\, but different values for this parameter in silica have bee
 n reported.  In this paper a scheme for the energy levels of both the diva
 lent and trivalent lanthanide ions in silica is proposed and compared to t
 he experimental data.\n\nhttps://events.saip.org.za/event/7/contributions/
 4859/
LOCATION: Acro1
URL:https://events.saip.org.za/event/7/contributions/4859/
END:VEVENT
BEGIN:VEVENT
SUMMARY:Low-temperature Electrical conductivity and Magneto-resistance of 
 Reduced Graphene Oxide Layers
DTSTART;VALUE=DATE-TIME:20110713T121500Z
DTEND;VALUE=DATE-TIME:20110713T123000Z
DTSTAMP;VALUE=DATE-TIME:20261107T111340Z
UID:indico-contribution-296-4884@events.saip.org.za
DESCRIPTION:Speakers: Ross McIntosh (WITS)\nWe report on the electrical tr
 ansport properties of graphene oxide (GO) and GO reduced using an organic 
 acid (RGO). Two terminal GO and RGO devices were assembled via dielectroph
 oresis. The current-voltage characteristics of these devices were studied 
 at low temperatures (77 K to 300 K) using a micromanipulated probe station
 . The I-V characteristics for RGO devices were found to be almost linear\,
  indicating metallic behavior. This is in contrast to reports by other gro
 ups who have suggested variable range hopping (both Mott and Efros-Shklovs
 kii) or space charge limited conduction. The density of states at the Ferm
 i level in RGO was found to be an order of magnitude greater than that of 
 GO.  This was confirmed by four probe low temperature RT data (3 K to 300 
 K) which showed a T^2 dependence. Further support for the metallic nature 
 of RGO was confirmed with magnetoresistance data at low temperatures (from
  3 K) and fields up to 12 T. We believe reduction with organic acid does n
 ot introduce a high defect density\, unlike the conventional reducing agen
 t hydrazine. The superb electronic properties of RGO synthesized with this
  new method could find use in high-speed spintronic and magnetic memory de
 vices.\n\nhttps://events.saip.org.za/event/7/contributions/4884/
LOCATION: Acro1
URL:https://events.saip.org.za/event/7/contributions/4884/
END:VEVENT
BEGIN:VEVENT
SUMMARY:Thermoluminescent properties of BaAl2O4:Eu2+\,Gd3+phosphors prepar
 ed by combustion method at different initiating temperatures.
DTSTART;VALUE=DATE-TIME:20110714T094500Z
DTEND;VALUE=DATE-TIME:20110714T100000Z
DTSTAMP;VALUE=DATE-TIME:20261107T111340Z
UID:indico-contribution-296-4933@events.saip.org.za
DESCRIPTION:Speakers: Bakang Moses Mothudi (University of South Africa)\nE
 uropium (Eu2+) and gadolinium (Gd3+) doped BaAl2O4 powder phosphors were p
 repared by combustion method at different initiating temperatures (400-100
 0 oC)\, using urea as a comburent. The powders were annealed at different 
 temperatures in the range of 400-1000 oC for 3 hours. X-ray diffraction da
 ta show that the crystallinity of the BaAl2O4 structure greatly improved a
 s the annealing temperature increased. The FT-IR absorption bands observed
  at 533\, 629 and 798 cm-1 for the samples annealed at higher temperatures
  (1100-1200 oC) are consistent with the stretching mode frequencies of BaA
 l2O4. Blue-green photoluminescence\, with persistent / long afterglow\, wa
 s observed at 503 nm.This emission was attributed to the 4f65d1- 4f7 trans
 itions of the Eu2+ ions. The phosphorescence decay curves were obtained by
  irradiating the samples with a monochromatized xenon lamp at an excitatio
 n wavelength of 393 nm.The glow curves and the decay curves of the samples
  irradiated by UV source (360 nm) were investigated using investigated usi
 ng the Thermoluminescence Reader (Integral-Pc Based) Nucleonix TL 1009I.\n
 \nhttps://events.saip.org.za/event/7/contributions/4933/
LOCATION: Acro1
URL:https://events.saip.org.za/event/7/contributions/4933/
END:VEVENT
BEGIN:VEVENT
SUMMARY:Carbon-Nickel Oxide Nanocomposite coatings: Preparation and charac
 terization
DTSTART;VALUE=DATE-TIME:20110713T114500Z
DTEND;VALUE=DATE-TIME:20110713T120000Z
DTSTAMP;VALUE=DATE-TIME:20261107T111340Z
UID:indico-contribution-296-4949@events.saip.org.za
DESCRIPTION:Speakers: Ngcali Tile (CSIR NLC\, School of Physics University
  of KwaZulu Natal)\nNanocomposite materials have wide range of application
 s in solar energy conversion. In this work\, C-NiO nanocomposite coatings 
 are prepared using sol-gel synthesis and deposited on aluminium substrates
  using a spin coater. The coatings are prepared from alcoholic sols based 
 on Ni-acetate using diethalonamine as a chelating agent and polyethylene g
 lycol (PEG) as organic template. Sucrose is used as a carbon source. Sols 
 with different PEG and sucrose concentrations are prepared and coated on a
 luminium substrates. The effect of heat temperature on the properties is a
 lso investigated. The optical and structural changes of the nanocomposite 
 coatings are characterized by UV-Vis\, FTIR\, thermal emissometer\, Raman\
 , and SEM techniques. It has been shown that the solar absorption increase
 s with increasing the heating temperature in the temperature range 300 –
  550 °C due to the increase in carbon content in the composite material. 
 Preliminary durability studies on these samples will also be presented\n\n
 https://events.saip.org.za/event/7/contributions/4949/
LOCATION: Acro1
URL:https://events.saip.org.za/event/7/contributions/4949/
END:VEVENT
BEGIN:VEVENT
SUMMARY:Synthesis and Characterization of Structural and Luminescent prope
 rties of long afterglow CaAl<sub>2</sub>O<sub>4</sub>: Eu<sup>2+</sup>\, N
 d<sup>3+</sup>\, Dy<sup>3+</sup> nano-scaled phosphors by solution – com
 bustion technique.
DTSTART;VALUE=DATE-TIME:20110713T093000Z
DTEND;VALUE=DATE-TIME:20110713T094500Z
DTSTAMP;VALUE=DATE-TIME:20261107T111340Z
UID:indico-contribution-296-4969@events.saip.org.za
DESCRIPTION:Speakers: Ali Wako (University Of The Free State\, QwaQwa Camp
 us.)\nLong afterglow calcium aluminate phosphors doped with Eu2+ and co-do
 ped with Nd3+ /or Dy3+ (CaAl2O4:Eu2+\, Nd3+\, Dy3+) were fabricated by ure
 a-nitrate solution – combustion method at 500 °C.\nThe effects of varyi
 ng concentrations of Ca:Al and co-dopants molar ratio (Nd3+:Dy3+) on the s
 tructural and luminescent properties of the phosphor were investigated. It
  was observed that Ca:Al molar ratios greatly affect the crystalline struc
 ture of the material. The results of the X-ray diffraction (XRD) analysis 
 reveal that the formation of several crystalline phases depends on the mol
 ar ratios of the host material. The peaks show the presence of other phase
 s such as Ca3Al2O6 and CaAl4O7 but the predominant phase formed was that o
 f CaAl2O4. As the concentration of Ca ions increase\, the peak intensity i
 ncrease which led to formation of monoclinic CaAl2O4 as a single phase for
  the 1.5% Ca. However it was found that the crystalline structure is gener
 ally not affected by variation of the co-dopants concentration. \nPL studi
 es revealed a general rise in intensity with increase in the mole ratio of
  Ca:Al . The highest PL intensity was observed with 1.5% Ca but was weak w
 ith 0.1% Ca. Also it is evident that as the fraction of Nd3+ increase and 
 that of Dy3+ decrease proportionally good emission intensities are formed 
 in the region 400nm-500nm at the ratio 1:1. The initial luminescent intens
 ity and rate of decay vary from each other when co-doped with various prop
 ortions of Nd3+ and Dy3+. Low Nd3+ exhibited high initial luminescent inte
 nsity but low decay rate because of insufficient trap vacancies in the hos
 t matrix.\n\nhttps://events.saip.org.za/event/7/contributions/4969/
LOCATION: Acro1
URL:https://events.saip.org.za/event/7/contributions/4969/
END:VEVENT
BEGIN:VEVENT
SUMMARY:Conductivity crossover in hot filament CVD grown nano-crystalline 
 diamond films doped with nitrogen.
DTSTART;VALUE=DATE-TIME:20110713T091500Z
DTEND;VALUE=DATE-TIME:20110713T093000Z
DTSTAMP;VALUE=DATE-TIME:20261107T111340Z
UID:indico-contribution-296-4970@events.saip.org.za
DESCRIPTION:Speakers: George Chimowa (Wits)\nWe report on the synthesis an
 d electrical characterization of nano-crystalline diamond films grown by h
 ot filament chemical vapor deposition. Low temperature magnetoresistance m
 easurements have shown a crossover in conductivity from hopping\, activate
 d to semi-metallic conduction as the nitrogen level in the CVD chamber is 
 increased from 10% - 15%\, 20% to 22% respectively. Raman spectroscopy stu
 dies and SEM micrograph indicate a change in morphology with deposition pa
 rameters such as pressure\, temperature and gas chemistry while AFM microg
 raph suggests a columnar growth process. In the semi-metallic regime the c
 onduction is characterized by anisotropic 3D weak localization mechanism w
 ith a weak temperature dependence of the dephasing time (D) approximate
 ly (D)  T-0.7. Such behavior has been reported in Superlattice struc
 tures. Understanding of the transport properties in nano-crystalline diamo
 nd films is a perquisite for the application of diamond films in nano-elec
 tronics for fast switching and field emission devices.\n\nhttps://events.s
 aip.org.za/event/7/contributions/4970/
LOCATION: Acro1
URL:https://events.saip.org.za/event/7/contributions/4970/
END:VEVENT
BEGIN:VEVENT
SUMMARY:Synthesis and characterization of Water soluble Covellite Copper S
 ulphide Quantum Dots
DTSTART;VALUE=DATE-TIME:20110713T090000Z
DTEND;VALUE=DATE-TIME:20110713T091500Z
DTSTAMP;VALUE=DATE-TIME:20261107T111340Z
UID:indico-contribution-296-4976@events.saip.org.za
DESCRIPTION:Speakers: Swikisani Nelwamondo (University of Johannesburg)\nC
 ovellite copper monosulphide (CuS) is a representative I–VI chalcogenide
  semiconductor with the unique photoelectricity transformation characteris
 tic. Due to quantum confinement effect\, CuS nanoparticles exhibit optical
  and electrical properties as compared to the bulk materials. CuS is an in
 direct semiconductor with a bandgap around 1.7 eV. At high temperature CuS
  exhibits fast ion conduction and shows metal-like electrical conductivity
  and is an important semiconductor because of its excellent optical and el
 ectronic functionality. Colloidal method was used to develop CuS nanoparti
 cles from copper acetate monohydrate and Thioacetamide in water and methan
 ol using alanine as a stabilizing agent at pH 10 at different low temperat
 ures. Water soluble CuS quantum dots in the form of rods and spherical sha
 ped with an average diameter of 3-10 nm has been successfully obtained. Th
 e as-obtained CuS nanoparticles were characterized by X-ray diffractometry
  (XRD)\, scanning electron microscope (SEM)\, energy-dispersive X-ray spec
 troscopy (EDS)\, Infrared spectra (FT-IR)\, UV-visible spectroscopy (UV) a
 nd Photoluminescence (PL). Effect of temperature was investigated for the 
 stability of nanoparticles\n\nhttps://events.saip.org.za/event/7/contribut
 ions/4976/
LOCATION: Acro1
URL:https://events.saip.org.za/event/7/contributions/4976/
END:VEVENT
BEGIN:VEVENT
SUMMARY:Equivalent parameters for empirical pseudopotential and k•p mode
 ls
DTSTART;VALUE=DATE-TIME:20110713T130000Z
DTEND;VALUE=DATE-TIME:20110713T131500Z
DTSTAMP;VALUE=DATE-TIME:20261107T111340Z
UID:indico-contribution-296-4992@events.saip.org.za
DESCRIPTION:Speakers: Kagiso Mpshe (Unisa)\nAfter thirty-five years the em
 pirical pseudopotential electronic band structures that were fitted by Jam
 es R. Chelikowsky and Marvin L. Cohen (Phys. Rev. B 14\, 556\, 1976) are s
 till used widely and are regarded by some workers as being among the best.
  Although the original paper by Chelikowsky and Cohen has received more th
 an 600 citations\, not all subsequent workers have been able to reproduce 
 the band structures accurately. In a few of the citing papers\, significan
 t errors were introduced by\, for example\, incorrectly adding the effects
  of non-locality in the core potentials and spin-orbit coupling. In the or
 iginal work both of these effects were added as perturbations. In the pres
 ent work it is shown that the original calculations of Chelikowsky and Coh
 en can be reproduced accurately\, even without the use of perturbation the
 ory. This reproduction allows the original band structures to be used with
  great ease. As an example\, the original band structures are used as inpu
 t to an optimization calculation which produces equivalent fourteen-band a
 nd thirty-band (full-zone) k•p parameters for the original eleven diamon
 d and zinc-blende semiconductors. The original band structures are also co
 mpared to those obtained through state-of-the-art ab-initio density functi
 onal calculations.\n\nhttps://events.saip.org.za/event/7/contributions/499
 2/
LOCATION: Acro1
URL:https://events.saip.org.za/event/7/contributions/4992/
END:VEVENT
BEGIN:VEVENT
SUMMARY:Electrical characterization of two metastable defects introduced i
 n GaN by Eu-ion  implantation
DTSTART;VALUE=DATE-TIME:20110715T060000Z
DTEND;VALUE=DATE-TIME:20110715T061500Z
DTSTAMP;VALUE=DATE-TIME:20261107T111340Z
UID:indico-contribution-296-4993@events.saip.org.za
DESCRIPTION:Speakers: Walter Meyer (University of Pretoria)\nDefects intro
 duced by 300 keV Eu ions in HVPE grown Si-doped GaN were investigated by m
 eans of deep level transient spectroscopy (DLTS). After implantation\, the
  samples were annealed at 1000 °C and Ti/Al/Ni/Au ohmic and Ni/Au Schottk
 y contacts were deposited. The Schottky contacts were found to be of high 
 quality\, with leakage current at 1 V reverse bias of below 10 8 A.\n\nTwo
  peaks in the DLTS spectrum showed metastable behaviour. They were labelle
 d E1 and E2 and had activation enthalpies of 0.20 eV and 0.28 eV respectiv
 ely. Laplace analysis showed that the E1 was a due to a single exponential
  decay\, while the E2 consisted of the sum of three exponential decays. We
  found that the E1 and E2 defects are metastable\, and that the E2 defect 
 may be reversibly transformed to the E1 defect by a zero bias. We found th
 at the transition between these defects is not described well by a single 
 exponential decay\, but rather by the integral over a range of exponential
  decays.\n\nhttps://events.saip.org.za/event/7/contributions/4993/
LOCATION: Acro1
URL:https://events.saip.org.za/event/7/contributions/4993/
END:VEVENT
BEGIN:VEVENT
SUMMARY:Synthesis and Characterization of Ba1-xMgxAl2O4:Eu nanophosphors P
 repared Using Solution – Combustion Method.
DTSTART;VALUE=DATE-TIME:20110714T101500Z
DTEND;VALUE=DATE-TIME:20110714T103000Z
DTSTAMP;VALUE=DATE-TIME:20261107T111340Z
UID:indico-contribution-296-4998@events.saip.org.za
DESCRIPTION:Speakers: Francis Dejene (University of the Free State)\nEurop
 ium-doped barium magnesium aluminate (BaMgAlx0y:Eu) phosphors were obtaine
 d at low temperatures (500˚C) using the solution - combustion of correspo
 nding metal nitrate–urea solution mixtures. The particle size and morpho
 logy and the structural and luminescent properties of the as-synthesized p
 hosphors were examined by means of scanning electron microscopy (SEM)\, X-
 ray diffraction (XRD)\, Auger spectroscopy\, transmission electron spectro
 scopy (TEM) and photoluminescence (PL). It was found that the Ba:Mg molar 
 ratios showed greatly influence not only on the particle size and morpholo
 gy\, but also on their PL spectra and crystalline structure. The BaMgAl2O4
  nanophosphors display a monoclinic structure indicating a small change in
  peak position at high angles due to differences in size between Ba and Mg
  ions. The peak of the emission band occurs at longer wavelength (around 6
 15nm) with increase in Mg concentration but display a broad band emission 
 at 515 nm for lower Mg concentration. The green emission is probably due t
 o the influence of 5d electron states of Eu2+ in the crystal field because
  of atomic size variation causing crystal defects while the red emission i
 s due to f-f transitions. This finding clearly demonstrate the possibility
  of fine tuning the color emission and solid solubility limit in Ba1-xMgxA
 l204:Eu phosphors through the simple and cheap process. A green phosphor w
 ith almost pure phase with significantly enhanced luminescence and longer 
 after glow can be easily prepared by solution combustion method by doping 
 with slight magnesium concentration (1 mole % Mg).\n\nhttps://events.saip.
 org.za/event/7/contributions/4998/
LOCATION: Acro1
URL:https://events.saip.org.za/event/7/contributions/4998/
END:VEVENT
BEGIN:VEVENT
SUMMARY:Light scattering studies of boron carbide films grown by laser abl
 ation: thin-film surface quality and elasticity
DTSTART;VALUE=DATE-TIME:20110715T063000Z
DTEND;VALUE=DATE-TIME:20110715T064500Z
DTSTAMP;VALUE=DATE-TIME:20261107T111340Z
UID:indico-contribution-296-5050@events.saip.org.za
DESCRIPTION:Speakers: Bhekumusa Mathe (University of the Witwatersrand)\nC
 ovalently bonded solids based on boron\, carbon\, or nitrogen are the hard
 est materials\, and B4C is the third hardest after diamond and cubic boron
  nitride. Thin films of boron carbide were formed by pulsed laser depositi
 on at room temperature and at higher temperatures up to 800 o C using a si
 ntered B4C target. Whilst the nature of the particulates embedded in the f
 ilms and the composition and bonding states of the films is known to vary 
 depending on the laser fluence\, it is of considered interest in this stud
 y to understand how the surface quality\, microstructure and tensile prope
 rties of B4C would depend on substrate temperature. The deposition paramet
 ers such as the laser intensity\, vacuum\, supporting gas conditions\, tar
 get-substrate distance\, would be controlled such that only substrate temp
 erature is used to modify the film properties and composition. Raman scatt
 ering studies and AFM measurements would be used to probe the microstructu
 re and bonding of the film as the substrate temperature is varied\, whilst
  Brillouin scattering measurements would be used examine the elasticity ch
 anges.\n\nhttps://events.saip.org.za/event/7/contributions/5050/
LOCATION: Acro1
URL:https://events.saip.org.za/event/7/contributions/5050/
END:VEVENT
BEGIN:VEVENT
SUMMARY:Parametric Resonance Features in the Coupled Josephson Junctions
DTSTART;VALUE=DATE-TIME:20110715T070000Z
DTEND;VALUE=DATE-TIME:20110715T071500Z
DTSTAMP;VALUE=DATE-TIME:20261107T111340Z
UID:indico-contribution-296-5104@events.saip.org.za
DESCRIPTION:Speakers: Yury Shukrinov (BLTP\, JINR\, Dubna)\nA review of ou
 r last results on the phase dynamics of a stack of coupled Josephson junct
 ions in layered superconductors is presented. The current voltage characte
 ristics (CVC) of intrinsic Josephson junctions (IJJ) are numerically calcu
 lated in capacitively coupled Josephson junction model (CCJJ model)  and C
 CJJ model with diffusion current (CCJJ+DC model). We discuss the features 
 of the parametric resonance and its manifestation in the breakpoint region
  of CVC. We demonstrate the fine structure in CVC  and investigate it by c
 harge-charge and current-current correlation functions. The ideas concerni
 ng the experimental observation of the breakpoint features are considered.
  Charge creation in superconducting layers and nucleation of longitudinal 
 plasma wave (LPW) for stacks with different number of junctions are predic
 ted. Time dependence of the charge oscillations in the superconducting lay
 ers is analyzed at different values of bias current. We demonstrate the di
 fferent time stages in the development of the LPW and present the results 
 of FFT analysis at different values of bias current. The effects of noise 
 in the bias current and the external microwave radiation on the charge dyn
 amics of the coupled Josephson junctions are found. These effects introduc
 e a way to regulate the process of LPW nucleation in the stack of IJJ.\n A
  role of diffusion current in the hysteretic behavior of coupled Josephson
  junctions is discussed. The superconducting\, quasiparticle\, diffusion\,
  and displacement currents have been calculated as functions of the total 
 current through the system. The role of the diffusion current in the forma
 tion of the CVC curves has been studied and its influence on the CVC curve
  branching and the magnitude of the return current has been revealed. The 
 calculation results agree qualitatively with the experimental data.\n\nhtt
 ps://events.saip.org.za/event/7/contributions/5104/
LOCATION: Acro1
URL:https://events.saip.org.za/event/7/contributions/5104/
END:VEVENT
BEGIN:VEVENT
SUMMARY:Structural features of the Cu-In-Ga-Se precursors for formation of
  Cu(In\,Ga)Se2 thin films by thermal reaction of InSe/Cu/GaSe alloys to el
 emental Se vapour.
DTSTART;VALUE=DATE-TIME:20110715T061500Z
DTEND;VALUE=DATE-TIME:20110715T063000Z
DTSTAMP;VALUE=DATE-TIME:20261107T111340Z
UID:indico-contribution-296-5125@events.saip.org.za
DESCRIPTION:Speakers: Francis Dejene (University of the Free State)\nThe q
 uaternary compound semiconductor Cu(In\,Ga)Se2 is one of the most attracti
 ve materials for high efficiency solar cells due to its tunable band gap t
 o match well the solar spectrum. In this study\, semiconducting Cu(In\,Ga)
 Se2 thin films were prepared by a classical two-step growth process\, whic
 h involves the selenization and/or sulfurization of In/Cu-Ga precursor.  D
 uring the precursor formation step metallic In/Cu-Ga alloys were deposited
  onto the Mo coated soda lime glass substrates by DC magnetron sputter pro
 cess. The respective precursors were subsequently reacted with H2Se and/or
  H2S gasses\, at elevated temperatures. By optimizing the selenization par
 ameters\, such as the gas concentrations\, reaction time\, reaction temper
 ature\, and the flow of H2Se and H2S\, high quality\, single phase quatern
 ary films were obtained. The gallium and sulfur diffusion behaviors were f
 ound to depend strongly on the selenization/sulfurization profile. The sur
 face morphology\, phase structure and composition of the layers were analy
 zed by scanning electron microscope (SEM)\, atomic force microscopy (AFM)\
 , X-ray diffraction (XRD)\, and electron diffraction spectroscopy (EDS). P
 hotoluminescence (PL) measurements were performed to examine the optical p
 roperties of the films.\n\nhttps://events.saip.org.za/event/7/contribution
 s/5125/
LOCATION: Acro1
URL:https://events.saip.org.za/event/7/contributions/5125/
END:VEVENT
BEGIN:VEVENT
SUMMARY:NON-SPECIALIST: Organic solar cells: An overview focusing on metal
  oxide buffer layer and post-fabrication annealing
DTSTART;VALUE=DATE-TIME:20110714T100000Z
DTEND;VALUE=DATE-TIME:20110714T101500Z
DTSTAMP;VALUE=DATE-TIME:20261107T111340Z
UID:indico-contribution-296-5131@events.saip.org.za
DESCRIPTION:Speakers: Odireleng Ntwaeaborwa (University of the Free State)
 \nPhotovoltaic cell devices constructed from organic materials are becomin
 g increasingly efficient because of the discovery of the bulk heterojuncti
 on concept.  Today\, organic photovoltaic cell (OPVC) devices fabricated f
 rom the blends of poly(3-hyxylthiopene) (P3HT) and [6\,6] –phenyl C61-bu
 tyric acid methyl ester (PCBM) are the most widely studied bulk heterojunc
 tion systems because of their relatively good photovoltaic (PV) properties
 . Although the P3HT:PCBM based solar devices exhibit excellent PV properti
 es compared to other bulk heterojunction polymer solar cells\, their effic
 iency ( 8%) is still too low compared to that ( 20%) of conventional
  silicon PV cells. One way of improving the performance of these devices i
 s by inserting a metal oxide buffer layer between the active layer and the
  anode.  In addition\, the PV properties of OPVC devices can also be impro
 ved by post-fabrication heat treatment (or annealing). This review provide
 s an overview of OPVC devices focusing on: a brief history of the OPVC dev
 ices\, device construction\, and the effects of ZnO nanoparticles buffer l
 ayer and post-fabrication annealing on the general performance of  P3HT:PC
 BM based solar devices.\n\nhttps://events.saip.org.za/event/7/contribution
 s/5131/
LOCATION: Acro1
URL:https://events.saip.org.za/event/7/contributions/5131/
END:VEVENT
BEGIN:VEVENT
SUMMARY:Magnetic properties of carbon nanospheres at low temperatures
DTSTART;VALUE=DATE-TIME:20110713T100000Z
DTEND;VALUE=DATE-TIME:20110713T101500Z
DTSTAMP;VALUE=DATE-TIME:20261107T111340Z
UID:indico-contribution-296-5167@events.saip.org.za
DESCRIPTION:Speakers: Makhosonke Dubazane (University of the Witwatersrand
 )\nThe magnetic and electrical properties of nitrogen doped carbon nanosph
 eres can be probed using Electron Magnetic Resonance (EMR) techniques. Pre
 vious Raman spectroscopy studies show that both the pristine and doped sph
 eres are graphitic in character. However\, XRD measurement showed that the
 se spheres consist of graphitic crystallites embedded in an amorphous phas
 e. Previous ESR measurements showed large peak on nitrogen doped spheres\,
  implying that the nitrogen occupies substitutional sites in graphitic lat
 tice. The EMR measurements clearly showed large Curie-type paramagnetism a
 t low temperatures for all the samples investigated. The EMR peak-to-peak 
 linewidth have provided evidence of the phonon bottleneck effect in one of
  the sample investigated\, meaning to say that there is a strong interacti
 on between localized and conduction electrons. The broadening of linewidth
  may be manifested by a Korringa type interaction whereby the spin-lattice
  relaxation time T1 is inversely proportional to the temperature.  The sam
 ple with the highest concentration of nitrogen behaves very differently fr
 om the other samples studied in th temperature range 77 K to 300 K\, and t
 his behaviour is not well understood at present.  This may involve contrib
 utions from electron scattering with stationary nitrogen impurities\, and 
 therefore different spin relaxation mechanisms which are related to the El
 liot and Yafet mechanisms.\n\nhttps://events.saip.org.za/event/7/contribut
 ions/5167/
LOCATION: Acro1
URL:https://events.saip.org.za/event/7/contributions/5167/
END:VEVENT
BEGIN:VEVENT
SUMMARY:Thermal damage study on diamond tools at varying laser heating pow
 er and temperature by Raman spectroscopy
DTSTART;VALUE=DATE-TIME:20110714T103000Z
DTEND;VALUE=DATE-TIME:20110714T104500Z
DTSTAMP;VALUE=DATE-TIME:20261107T111340Z
UID:indico-contribution-296-5181@events.saip.org.za
DESCRIPTION:Speakers: Bathusile Masina (CSIR-National Laser Centre)\nDiamo
 nd tools are generally made of sintered polycrystalline diamond (PCD) on a
  hard metal tungsten carbide (WC-Co) substrate during the High Pressure Hi
 gh Temperature (HPHT) process. The diamond tools are used widely as cuttin
 g and drilling tools due to their unique combination of superior propertie
 s. However\, there are several issues that need to be resolved about the d
 iamond tools. At present it is known that diamond tools degrade with time 
 as it is normally used at high temperatures\, but what is not known is the
  damage mechanism and how the degradation varies as a function of temperat
 ure. In this study\, we have made use of a laser based system to raise the
  temperature of the diamond tool and measure the diamond tool temperature.
  A study of the thermal damage on the diamond tool with respect to the las
 er heating power and temperature has been carried out using Raman spectros
 copy\; to determine the structure and composition of the resulting diamond
  tool. We have shown the radical changes on the diamond tool as the laser 
 heating power and temperature increases.\n\nhttps://events.saip.org.za/eve
 nt/7/contributions/5181/
LOCATION: Acro1
URL:https://events.saip.org.za/event/7/contributions/5181/
END:VEVENT
BEGIN:VEVENT
SUMMARY:Tungsten Oxide Nanostructures synthesized by Laser Pyrolysis
DTSTART;VALUE=DATE-TIME:20110713T101500Z
DTEND;VALUE=DATE-TIME:20110713T103000Z
DTSTAMP;VALUE=DATE-TIME:20261107T111340Z
UID:indico-contribution-296-5185@events.saip.org.za
DESCRIPTION:Speakers: Malcolm Govender (CSIR)\nLaser pyrolysis has been us
 ed to synthesize tungsten oxide (WO3-x) nanostructures\, and here we repor
 t on the production of six-sided nanostars. The proposed mechanism used to
  explain the growth of the stars is the concentration difference and gradi
 ent mechanism which speculates that a high local concentration of one reac
 tant mixed with a low concentration of another reactant under ambient cond
 itions\, and the high concentration favoured the thermodynamic conditions 
 for crystal growth and the low concentration resulted in a diffusion-contr
 olled kinetic environment for growth of hierarchical structures. Apart fro
 m precursor concentration\, further analysis was carried out to determine 
 the influence of varying laser wavelengths and power densities in such exp
 eriments. The laser wavelength was varied between 9.22-10.82 m at a fix
 ed power density of 51.2 W/cm2\, and the laser power density was varied be
 tween 17-110 W/cm2 at a fixed wavelength of 10.6 m. Annealing the sampl
 es at 450oC in argon atmosphere for 17 hours appeared to be an essential s
 tep for further growth of nanostructures. Particle size and morphology wer
 e determined by scanning and transmission electron microscopy and the chem
 ical composition was determined by x-ray diffraction studies in conjunctio
 n with Raman spectroscopy and energy dispersive x-ray spectroscopy to conf
 irm the tungsten oxide phase as a function of the laser parameters.\n\nhtt
 ps://events.saip.org.za/event/7/contributions/5185/
LOCATION: Acro1
URL:https://events.saip.org.za/event/7/contributions/5185/
END:VEVENT
BEGIN:VEVENT
SUMMARY:The radioactive ion beam facility project at iThemba Labs and its 
 potencial uses for materials research
DTSTART;VALUE=DATE-TIME:20110714T090000Z
DTEND;VALUE=DATE-TIME:20110714T091500Z
DTSTAMP;VALUE=DATE-TIME:20261107T111340Z
UID:indico-contribution-296-5187@events.saip.org.za
DESCRIPTION:Speakers: Carlos Pineda-Vargas (iThemba LABS)\nAn introduction
  to the new development project on the implementation of a radioactive ion
  beam (RIB) facility at iThemba LABS will be presented. In particular with
  relation to the uses of the RIB for the application of research in conden
 se matter and materials research. Some leading examples by international l
 aboratories using radioactive nuclei as probes to enhance the understandin
 g of structural and/or electronic/magnetic lattice environment in material
 s (metals\, insulators or semiconductors) will be also presented. The main
  procedures of such investigations are implantation induced lattice damage
  and its annealing behavior\, the lattice site of the implanted ion after 
 annealing\, the interaction between impurities or impurities and intrinsic
  defects\, the electronic and optical properties of the implanted species 
 and the identification of defects and impurities. The understanding and th
 e control of diffusion profiles of intrinsic and extrinsic defects particu
 larly in semiconductors is significantly enhanced using radioactive tracer
  diffusion.\n\nhttps://events.saip.org.za/event/7/contributions/5187/
LOCATION: Acro1
URL:https://events.saip.org.za/event/7/contributions/5187/
END:VEVENT
BEGIN:VEVENT
SUMMARY:Computational modelling of Zr-Nb alloys by solid solution approach
DTSTART;VALUE=DATE-TIME:20110714T114500Z
DTEND;VALUE=DATE-TIME:20110714T120000Z
DTSTAMP;VALUE=DATE-TIME:20261107T111340Z
UID:indico-contribution-296-5192@events.saip.org.za
DESCRIPTION:Speakers: Moyahabo Chuma (Materials Modelling Centre)\nWe use 
 density functional theory to investigate the structural\, elastic properti
 es and energetic stabilities of Zr\, Nb and its alloys in the alpha and be
 ta phases\, employing pseudopotential plane wave methods within the Pardew
 -Burke-Ernzerhof Generalized Gradient Approximation (PBE-GGA). The structu
 res were fully optimized in a non-magnetic state\, allowing atomic positio
 ns\, cell volume and shape to change. Lattice parameters for the pure phas
 es gave excellent agreement with the available experimental data. We also 
 found that the phonon dispersions curves display soft-modes for the metast
 able beta-Zr phase which is lacking on the alpha-Zr and beta-Nb\, conditio
 n of mechanical stability. The solid solution calculations show that an in
 crease in the Nb contents destabilizes the structures in both the alpha an
 d beta phases. Interestingly\, the calculated elastic moduli for Zr-2.3%Nb
  are in good agreement to the experimental results of Zr-2.5%Nb.\n\nhttps:
 //events.saip.org.za/event/7/contributions/5192/
LOCATION: Acro1
URL:https://events.saip.org.za/event/7/contributions/5192/
END:VEVENT
BEGIN:VEVENT
SUMMARY:Stabilities of low and high pressure structures of CoPO<sub>4</sub
 > and MnPO<sub>4</sub>
DTSTART;VALUE=DATE-TIME:20110713T124500Z
DTEND;VALUE=DATE-TIME:20110713T130000Z
DTSTAMP;VALUE=DATE-TIME:20261107T111340Z
UID:indico-contribution-296-5199@events.saip.org.za
DESCRIPTION:Speakers: NDANDULENI LESLEY LETHOLE (SAIP)\nCrystals of LiFePO
 4 and related materials have recently received a lot of attention due to t
 heir promising use as cathodes in rechargeable lithium ion batteries. Thes
 e compounds have been known for good stability and low cost. The Co based 
 compound LiCoPO4\, has rapidly become of particular interest as recent mea
 surements found a potential of 4.8 V\, while the Mn based compound structu
 re has an equilibrium voltage of 4.1 V\, which is compatible with the elec
 trolyte presently used in Li-ion batteries. \nBefore the introduction of a
 morphisation recrystallisation methods to quaternary LiMPO4 (M=Mn and Co)\
 , it will be important to commence with ternaries (CoPO4 and MnPO4)\, sinc
 e ternaries are less complex. Hence we investigate the mechanical\, optica
 l and structural stabilities of the different polymorphs of CoPO4 and MnPO
 4\, before atomistic simulations\, by employing the pseudo-potential plane
 wave calculations within the Local Density Approximation (LDA) and Pardew-
 Wang Generalized Gradient Approximation (GGA).\n\nhttps://events.saip.org.
 za/event/7/contributions/5199/
LOCATION: Acro1
URL:https://events.saip.org.za/event/7/contributions/5199/
END:VEVENT
BEGIN:VEVENT
SUMMARY:Atomistic Simulation Study on Lithiated Manganese Dioxide Nanostru
 ctures
DTSTART;VALUE=DATE-TIME:20110713T123000Z
DTEND;VALUE=DATE-TIME:20110713T124500Z
DTSTAMP;VALUE=DATE-TIME:20261107T111340Z
UID:indico-contribution-296-5200@events.saip.org.za
DESCRIPTION:Speakers: Kenneth Kgatwane (University of Limpopo)\nNanostruct
 ured materials are used to develop lithium-ion batteries with high energy\
 , high-rate capability and excellent cycling stability due to their huge s
 urface area\, short distance for mass and charge transport and freedom for
  volume change. They are capable of reversibly accommodating large amount 
 of Li\, on intercalation mesoporous β-MnO2 can accommodate Li/Mn = 0.92:1
  with 81% capacity retention. This is contrast to a very limited amount of
  Li\, that could be intercalated electrochemically into the bulk crystalli
 ne MnO2. The electrochemical properties of MnO2 are governed by the rich a
 nd complex microstructure it accommodates and characterisation at the atom
 istic level is difficult experimentally. \n\nAtomistic computer simulation
 s offer a unique platform of exploring structural features at the nanoscal
 e. Simulated amorphisation and recrystallisation technique\, involving ten
 s of thousands of atoms\, has been successfully used to generate models of
  various nano-forms of the complex manganese dioxides\, which include micr
 ostructural details. In the current study\, we apply this method to study 
 lithium insertion into the nanospheres\, nanosheets\, nanorods and nanopor
 ous structures of the binary manganese dioxides. Different Li concentratio
 ns (up to Li:Mn = 0.73:1) were inserted into the different nanostructures.
  Molecular dynamics simulation under the NPT ensemble was performed\, in o
 rder to allow the system to expand. The variation of mechanical properties
  and changes of microstructural features with low and high lithium concent
 ration are investigated. The resulting microstructure provides valuable in
 sights into the origins of electrochemical activity which could make it a 
 suitable battery electrode.\n\nhttps://events.saip.org.za/event/7/contribu
 tions/5200/
LOCATION: Acro1
URL:https://events.saip.org.za/event/7/contributions/5200/
END:VEVENT
BEGIN:VEVENT
SUMMARY:Influence of ruthenium on the oxidation behaviour of Cu-CNT nanoco
 mposite interconnect
DTSTART;VALUE=DATE-TIME:20110713T120000Z
DTEND;VALUE=DATE-TIME:20110713T121500Z
DTSTAMP;VALUE=DATE-TIME:20261107T111340Z
UID:indico-contribution-296-5224@events.saip.org.za
DESCRIPTION:Speakers: RASIDI SULE (MTech Stuent at TUT)\n\nCopper based in
 terconnect are widely used in the electronic industry. They provide the co
 nductive path required to achieve connection from one circuit element to a
 nother. However\, the application of copper based interconnect is often li
 mited by the oxidation behaviour of copper. At elevated temperature and hu
 midity\, the bonding strength of copper interconnect deteriorates due to c
 opper oxide formation on the surface which could result at device failure.
  Effort is made in this study to investigate the effect of ruthenium incor
 poration on the oxidation and electronic interconnection characteristic of
  Cu-CNT nanocomposite synthesized through the powder metallurgical techniq
 ue. The compacted samples were sintered by conventional sintering method. 
  Oxidation test was performed in tube furnace. The samples were oxidized i
 sothermally at different temperature. Electronics weighed balance with the
  precision of 0.01mg was employed to investigate the weight gain of the sa
 mple due to oxidation.  The morphology structure\, oxide layer thickness a
 nd possible crack on the sintered sample were examined using scanning elec
 tron microscope with energy dispersive X-ray spectroscopy (SEM/EDS). Phase
  identification was performed using an X-ray diffraction spectroscopy (XRD
 ). It could be concluded from the result obtained that minor addition of R
 u has a positive effect on the oxidation resistance of Cu-CNT nanocomposit
 e due to formation of a well protected oxide.\n\nhttps://events.saip.org.z
 a/event/7/contributions/5224/
LOCATION: Acro1
URL:https://events.saip.org.za/event/7/contributions/5224/
END:VEVENT
BEGIN:VEVENT
SUMMARY:Non-linear Fowler-Nordheim plots in thin film polymer-fullerene co
 mposite devices: Transition from electron-only to hole-only conduction
DTSTART;VALUE=DATE-TIME:20110714T091500Z
DTEND;VALUE=DATE-TIME:20110714T093000Z
DTSTAMP;VALUE=DATE-TIME:20261107T111340Z
UID:indico-contribution-296-5248@events.saip.org.za
DESCRIPTION:Speakers: Zivayi Chiguvare (University of the Witwatersrand)\n
 We studied charge injection and transport mechanisms in blends of poly(3-h
 exylthiophene) (P3HT) and [6\,6]-phenyl C61-butyric acid methylester (PCBM
 )\, by analysing dark\,  temperature dependent current-voltage characteris
 tics of the P3HT:PCBM blend thin films sandwiched between aluminium electr
 odes in a MIM configuration. We present a general method of interpreting F
 owler - Nordheim plots of metal/semiconductor/metal devices with pronounce
 d non-linear characteristics by dividing them into several regions based o
 n physical origins.  We show that by applying appropriate electric fields 
 it is possible to switch from electron-only conduction to hole-only conduc
 tion in a single Al/P3HT:PCBM/Al device. We affirm that electrons can be s
 electively transported through the lowest unoccupied molecular orbital of 
 PCBM at low applied voltages and low temperatures\; and alternatively hole
 s can be transported through the highest occupied molecular orbital of P3H
 T at higher applied voltages and high temperature\, within a single device
 .\n\nhttps://events.saip.org.za/event/7/contributions/5248/
LOCATION: Acro1
URL:https://events.saip.org.za/event/7/contributions/5248/
END:VEVENT
BEGIN:VEVENT
SUMMARY:Tailoring of Mechanical\, thermal and electrical properties of pol
 ymers composite:  A micro fuel cell perspective
DTSTART;VALUE=DATE-TIME:20110714T121500Z
DTEND;VALUE=DATE-TIME:20110714T123000Z
DTSTAMP;VALUE=DATE-TIME:20261107T111340Z
UID:indico-contribution-296-5256@events.saip.org.za
DESCRIPTION:Speakers: Hao Chen (CSIR)\nFuel cells have been intensively re
 searched for the past few decades for macro applications. However\, micro 
 fuel cells have not received so much attention. A micro fuel cell delivers
  power in the mW-W range\, and would be suitable for mobile purposes\, e.g
 . as a charger for cell-phone or other small devices. We consider polymers
  such as polydimethylsiloxane (PDMS) as a prospective structural material 
 candidate for a Micro Fuel Cell. The introduction of such a polymer as str
 uctural material will reduce the mass and the size of the micro fuel cell 
 and therefore optimize the current micro fuel cell models. In this perspec
 tive\, our work focuses on the tailorability and optimization of thermal\,
  mechanical\, and electrical properties of PDMS with different micro/nano 
 fillers such as silver particles\, carbon black\,. The mechanical property
  is characterized by Dynamic Mechanical Analysis(DMA). The thermal propert
 ies are measured using Thermal Gravimetric Analysis (TGA) and Cut-Bar ther
 mal conductivity measurement. Four point probe was used for electrical con
 ductivity measurement. Scanning Electron Microscopy (SEM) was used for sur
 face morphology characterization.\n\nhttps://events.saip.org.za/event/7/co
 ntributions/5256/
LOCATION: Acro1
URL:https://events.saip.org.za/event/7/contributions/5256/
END:VEVENT
END:VCALENDAR
